atlaslogo.jpg (8901 bytes)

METAL TO WOOD

 

  • Carbon steel and 410 Stainless Steel

  • Mechanical Zinc Plating with Oxyseal Long Life Coating

  • Available Painted with Sherwin Williams Exterior Grade Paint

  • EPDM flat bonded sealing washers.

  Size Point Carton Qty.
#9 Woodfast Double Lead Thread;  1/4" HexWasher Head

woodfast9.jpg (2245 bytes)

 #9-16 x 1" Self-Piercing 3,000
#9-16 x 1-1/2" Self-Piercing 2,500
#9-16 x 2" Self-Piercing 2,000
#9-16 x 2-1/2" Self-Piercing 1,000
#9-16 x 3" Self-Piercing 1,000
#10 LocFast - High & Low Thread; Anti-Backout thread; 1/4" Hex Washer Head

woodtite10.jpg (2752 bytes)

 #10-14 x 1" Self-Piercing 2,500
#10-14 x 1-1/2" Self-Piercing 2,500
#10-14 x 2" Self-Piercing 2,000
#10-14 x 2-1/2" Self-Piercing 1,500
#10-14 x 3" Self-Piercing 1,000
#12 Woodfast - Double Lead Thread; 1/4" Hex Washer Head

woodfast12.jpg (2379 bytes)

 #12-14 x 3/4" Self-Piercing

2,500

#14 Woodtite - 5/16" HexWasher Thread

woodtite14.jpg (3402 bytes)

 #14-10 x 1" Type 17 2,500
#14-10 x 1-1/2" Type 17 2,000
#14-10 x 2" Type 17 1,500
#14-10 x 2-1/2" Type 17 1,000

Back to top of page

 

PREMIUM ULTIMATE METAL TO WOOD FASTENERS

  • Carbon Steel Shank

  • Mechanical Zinc Plated

  • DEKS Mutli-Seal Washers® washers

  • 5/16" Zinc Cast Hex Head

LocFast

 Size Point Carton Qty.
Ultimate LocFast High & Low Thread; Anti-Backout Thread

ultlocfast.jpg (4871 bytes)

 #10-14 x 1" Self-Piercing 2,500
#10-14 x 1-1/2" Self-Piercing 2,000
#10-14 x 2" Self-Piercing 1,500
#10-14 x 2-1/2" Self-Piercing 1,500
#10-14 x 3" Self-Piercing 1,000

Back to top of page

 

woodpullover.jpg (7133 bytes)

PULL-OVER VALUES (lbs.) for 12mm O.D. Washers
(Sheet hardness Rb 75 to 80)
Average Ultimate Failure Values

Gauge
24 (.0239) 26 (.0179) 29 (.008)
704 lbs. 520 lbs. 460 lbs.

 

woodpullout.jpg (7049 bytes) PULL-OUT TEST RESULTS
Average Ultimate Failure Values

Test Material
Penetration
#9 WoodFast
#10 LocFast
#10 EnduraFast
#10 UltiMate
LocFast
S-P-F #2 1" 519 lbs. 498 lbs. 498 lbs.
S-P-F #2 1-1/2" 999 lbs. 899 lbs. 899 lbs.
Hem Fir #2 1" 716 lbs. 694 lbs. 694 lbs.
Hem Fir #2 1-1/2" 1,174 lbs. 1,080 lbs. 1,080 lbs.
1/2" CDX (4 ply) Full 377 lbs. 361 lbs. 361 lbs.
5/8" CDX Full 500 lbs. 490 lbs. 490 lbs.
3/4" CDX Full 565 lbs. 560 lbs. 560 lbs.
7/16" OSB Full 265 lbs. 223 lbs. 223 lbs.
15/32" OSB Full 192 lbs. 161 lbs. 161 lbs.
19/32" OSB Full 228 lbs. 219 lbs. 219 lbs.
26 ga. 50 KSI Full 212 lbs.

 

Average Ultimate Failure Values
  Min. Tensile (lbs.) Min. Torque (inch-lbs.) Min. Shear (lbs.) Head
Across Flats
(inches)		 Major Thread
Diameter
(inches)		 Minor Thread Diameter
(inches)		 Stress Area
(inch2)
#9 Woodfast woodfast9.jpg (2245 bytes) 1,800 65 1,100 .244-.247 .175-.181 .127-.133 .01068
#10 Woodfast woodtite10.jpg (2752 bytes) 1,817 68 1,216 .244-.250 .185-.195 .120-.130 .0110
Ultimate LocFast ultlocfast.jpg (4871 bytes) 1,817 68 1,216 .246-.250 .185-.195 .120-.130 .0110
#14 Woodtite

woodtite14.jpg (3402 bytes)

 3,150 125 2,150 .305-.312 .248-.254 .178-.185 .01828

Back to top of page

 

Installation Recommendations:

  • Recommended Driving Tools: 2,000 - 2,500 RPM electric screw gun with depth sensing nose piece to prevent overdriving and stripout
  • Seating Torque: For optimum screw and washer performance, seating torque of 30 - 60 in./lbs. is suggested.  For premium Ultimate fasteners with DEKS Multi-Seal washers, 15-25 in./lbs is suggested.

 

All test results and recommendations are based on laboratory tests.  Specific job site conditions should be taken into consideration when specifying the proper fastener.   Because applications vary, we assume no liability for use of this information.

 
Send an e-mail with questions or comments about this web site.  Sales Contacts  Tech Support Questions
Copyright © 2008 Atlas Bolt & Screw Company
Last modified: March 26, 2008